Why is water coming into my home? Can you help?
Icicles can be beautiful and make a home's appearance unique. However, if you have snow on your roof and icicles coming down from your gutters, the water can actually be from an ice dam that is preventing the water from the melting snow from running into your gutters and out of the drains. If that water continues to back up, it will go under your roofing materials and down the path of least resistance. Ultimately, it can end up in your ceilings which will be damaged and may fall and ruin your personal items. The only way to stop it is to remove the obstacle which is an ice dam.
Getting on your Milwaukee roof any time of the year can be dangerous, but even more so when it is cold and wet. Putting a ladder up and then climbing to reach the roof during these conditions is something that should be done by professionals.
The Ice Dam Crew are those professionals. After working on thousands of homes, we are skilled at operating in these conditions. We work all over Milwaukee and the surrounding areas. We are also one of the most trusted companies in the USA at finding and removing ice dams from roofs. Once the ice dam is removed, the water will flow as normal; outside of your home and not into your home. Reach out to us at 1-833-ICE CREW (1-833-423-2739) to get started.
What is an "ice dam" anyway?
Heat escaping from your home rises and melts the snow, but not all at the same time or in the same areas. As the water from the melted snow comes in contact with the snow that hasn’t melted, it gets colder and colder until it eventually freezes. That ice builds up and creates a wall (ice dam) that holds water which either freezes and increases the size of the wall or it builds up behind it forming a puddle. The heat is always released from your home, however, it comes more rapidly from vents, skylights and other areas that have less insulation. This means snow melts in those areas before it melts in areas that have better insulation or are lower on the roof. Often, this is near the gutters which is where many ice dams begin.
Shingles and other roofing materials are designed to help water flow off your home. As water backs up from the ice dam, it starts moving underneath your shingles and starts looking for the easiest way to move down. As your roofing materials aren’t designed for this, they simply don’t stand a chance. Water will always find a way down and that can mean into your home.
Can you make the water stop running into my home in Milwaukee?
We use steam to clear ice dams, unlike many other companies that use a heated pressure washer. This gives you fast results with little to no damage to your roof.
Faster results means savings for you as well. It's not all about the old adage: "Time is money." The reality is the faster you can stop the water running into your home, the faster you can stop additional damage. If water continues to flood in, it can collapse ceilings, ruin walls and flooring and turn electronics into useless items.
Ice Dam Crew is not only one of Milwaukee’s leading and most trusted Ice Dam Removal Companies, but homeowners and companies across the United States trust us to for their ice dam removals. The Ice Dam Crew is fully bonded and Insured for all residential and commercial properties. We are a family owned company and understand the problems that can arise from water leaking into a home or business.
We do NOT use hot water pressure washers like many Ice Dam Removal companies do. Those pressure washers can damage your roof and shingles when they blast 4000 PSI out of the tip of the hose and do not burn as hot as a true custom steamer. Please see our FAQ's page to see the difference between our True Steamer and our competitors hot water pressure washer.
Ice Dam Crew teams only use steam to remove ice dams. Not only is it more effective and faster, but it will not damage your roofing.
Steam reaching 250-300 degrees is hot enough to cut through the ice quickly, yet at less than 300 PSI, it will not damage your roof.
We are so confident in our process that Ice Dam Crew stands behind its work and is fully licensed and bonded for all of the work we complete.
Climbing onto a snowy/icy roof in Milwaukee in the middle of winter any time of day or night is dangerous. This is why we want to ensure you that we are fully bonded and insured for your safety and ours. We take all of the required safety measures needed to stay safe on your roof. Having a trustworthy company working on your roof is important so that is why we want to give you piece of mind with our before during and after photos and our 22+ years of experience.
Our Service Area
Proud to Serve The Following Areas:
- Eau Claire
- Fond Du Lac
- Green Bay
- La Crosse
- Stevens Point
- West Allis
- And All Areas in Between
If you are experiencing issues with ice dams beyond those areas, just give us a call! We work throughout the United States and we can take care of your ice dams and the problems they are causing you.
Let us know how we can help!
Frequently Asked Questions about Ice Dam Removal in Milwaukee
1. A steamer is low pressure & a pressure washer is high pressure. This means we will not cut into your roof using a steamer and cause damage like a pressure washer would.
2. Steamers get much hotter than a pressure washer. Pressure washers used pressure to cut through the ice. This means we get done with the job faster!
3. Less water is used with a steamer so this means you save $$$ on your water bill!
Reason one is there is not enough insulation in your attic. This may cause your roof to heat up. When it is cold outside and your roof heats up this causes the bottom layer of snow to melt, once the running water reaches the overhang of your roof (Which does not heat up) it will freeze on the edge. Over time the ice will keep building up and then the water will have no place to go besides into your home and down your walls.
The second reason Ice Dams form is from having too much snow on your roof. Having a lot much snow on your roof covers your roof vents which release heat from your roof. When the snow is over your vents it acts as insulation on top of your roof keeping the heat in. In this case, it acts the same way as not having enough insulation, it will heat up your roof and cause the water to freeze on the edge of your roof. Clearing the snow off of your roof after each snowfall is very beneficial in preventing ice dams.
Keeping the snow off of your roof is the best thing to do to for your roof when preventing Ice dams. How can ice dams form when there is no water on your roof to cause them?
Here are a few tips when removing the snow from your roof.
- If you choose to do it yourself always have safety gear when climbing onto your roof. Use chains for your boots, harness yourself so you do not fall, use a plastic shovel and not one with a metal tip and always shovel towards the ground so you do not tear shingles off of your roof.
- When using a snow rake to remove snow from your roof be sure to scrape all the way down to your shingles. Do not only remove most of the snow. When this happens the snow rake actually packs down the snow to your roof and this packed down snow turns to ice and in most cases goes up your roof much further. In most cases when this happens ice dams form the entire length of the area you shovel.
Uncomfortable with this? If you need to hire a professional to remove the snow and ice from your roof be sure to find the right company. Check to make sure they are bonded and insured and when they are on your roof don't be afraid to ask questions to ensure safety procedures.
Bonded and insured companies typically charge $300-$500 per hour. Using an Insured company is important because standing on an icy roof in the middle of winter is risky. If someone falls and gets hurt or an ice chunk falls off of your roof and damages something but you didn't make sure they were insured you could potentially be sued or have to pay out of pocket to repair any damages.
Another factor in removing ice dams in an efficient way is using the correct equipment. The Ice Dam Crew uses true low pressure steamers and not hot water pressure washers. When you hire a company you can easily find out what kind of machine they are using. All you need to do is ask to see their wand. If it has a trigger they are using a hot water pressure washer. If it does not have a trigger it is a true steamer. Hot water pressure washers do not burn as hot as a true steamer and they create much more damage because they have such a high PSI. In the case that this happens tell them to leave and hire a company with a true steamer.